openstack: no ping to Instance from neutron-gateway/0 - error “Destination Host Unreachable” The Next CEO of Stack OverflowHow should I setup MAAS so that it can be used by the Canonical OpenStack Autopilot?openstack: no ssh to instance from neutron-gateway/0 - error “Permission denied (publickey)”Openstack Neutron - Cannot Access Tenant Router GatewayCan Ping but Cannot SSH to Openstack VM InstanceJuju misconfigures neutron setup ?! Cannot connect to instancesMulti-cluster MAAS and JujuMAAS controller with two interfacesPreferred way to add second nic on separate network?MAAS cannot get power state for server with AMT. Cannot power on after it is powered offbr-ex and floating ips not accessibleOpenstack can't ping floating IP addressOpenStack deploy with JuJu - neutron-gateway blocked - services not running

How seriously should I take size and weight limits of hand luggage?

Mathematica command that allows it to read my intentions

Calculate the Mean mean of two numbers

Ising model simulation

How to unfasten electrical subpanel attached with ramset

Does the Idaho Potato Commission associate potato skins with healthy eating?

Small nick on power cord from an electric alarm clock, and copper wiring exposed but intact

Is a linearly independent set whose span is dense a Schauder basis?

How can I prove that a state of equilibrium is unstable?

How to pronounce fünf in 45

The sum of any ten consecutive numbers from a fibonacci sequence is divisible by 11

Variance of Monte Carlo integration with importance sampling

How do I keep Mac Emacs from trapping M-`?

A hang glider, sudden unexpected lift to 25,000 feet altitude, what could do this?

Physiological effects of huge anime eyes

Is it okay to majorly distort historical facts while writing a fiction story?

Gauss' Posthumous Publications?

Traveling with my 5 year old daughter (as the father) without the mother from Germany to Mexico

It it possible to avoid kiwi.com's automatic online check-in and instead do it manually by yourself?

Can I cast Thunderwave and be at the center of its bottom face, but not be affected by it?

What difference does it make matching a word with/without a trailing whitespace?

Direct Implications Between USA and UK in Event of No-Deal Brexit

Is it possible to make a 9x9 table fit within the default margins?

What does this strange code stamp on my passport mean?



openstack: no ping to Instance from neutron-gateway/0 - error “Destination Host Unreachable”



The Next CEO of Stack OverflowHow should I setup MAAS so that it can be used by the Canonical OpenStack Autopilot?openstack: no ssh to instance from neutron-gateway/0 - error “Permission denied (publickey)”Openstack Neutron - Cannot Access Tenant Router GatewayCan Ping but Cannot SSH to Openstack VM InstanceJuju misconfigures neutron setup ?! Cannot connect to instancesMulti-cluster MAAS and JujuMAAS controller with two interfacesPreferred way to add second nic on separate network?MAAS cannot get power state for server with AMT. Cannot power on after it is powered offbr-ex and floating ips not accessibleOpenstack can't ping floating IP addressOpenStack deploy with JuJu - neutron-gateway blocked - services not running










2















I performed a cluster node installation using this guide [OpenStack Charms Deployment Guide].(https://docs.openstack.org/project-deploy-guide/charm-deployment-guide/latest/install-maas.html), where the type of network is a Flat network and the components used are:



  • Maas

  • Juju

  • Openstack.

My lab is the following:



 +-------------+
Firewall
10.20.81.254
+-------------+
|
+-------------------------------------------------------------+
Switch
vlan81 vlan81 vlan81
+-------------------------------------------------------------+
| | || || || ||
+--------------+ +------------+ +------------------+
|Maas+Juju |Juju Gui| |Openstack
|10.20.81.1 |10.20.81.2 |10.20.81.21-24
+--------------+ +-------------+ +------------------+
|
+--------------------------------------------+
Private Subnet-1 Public Subnet-2
10.0.0.0/24 10.20.81.0/24
+---+----+--+ +----+------+
| | +----+ |
| | | | |
| +--------+ VR +-------------+
| | |
+--+-+ +----+
| |
| VM |
| .9 |
| |


my lab:



1 IBM System 3540 M4 Maas (500GB HDD - 8GB RAM - 1 Nic)
1 IBM System 3540 M4 Juju (500GB HDD - 8GB RAM -1 Nic)
4 IBM System 3540 M4 Openstack (500GBx2 HDD - 16GB RAM - 2 Nic)
1 Palo Alto Network Firewall


IP plan:



Public Network: 10.20.81.0/24
Private Network: 10.0.0.0/24

Maas: 10.20.81.1
Juju: 10.20.81.2
Openstack: 10.20.81.21-24
Gateway 10.20.81.254
Private Network 10.0.0.0/24
Instance: 10.0.0.9 - 10.20.81.215 (floating)


enter image description here



Openstack Router:
enter image description here



Openstack Security Group:
enter image description here



Maas route:



$: ip route
default via 10.20.81.254 dev enp2s0 proto static
10.20.81.0/24 dev enp2s0 proto kernel scope link src 10.20.81.1


Juju Controller:



ubuntu@juju-controller:~$ ip route
default via 10.20.81.254 dev enp8s0 proto static
10.20.81.0/24 dev enp8s0 proto kernel scope link src 10.20.81.2


Compute Nodes:



ubuntu@os-compute01:~$ ip route
default via 10.20.81.254 dev br-eno2 proto static
10.20.81.0/24 dev br-eno2 proto kernel scope link src 10.20.81.21
10.38.53.0/24 dev lxdbr0 proto kernel scope link src 10.38.53.1

ubuntu@os-compute02:~$ ip route
default via 10.20.81.254 dev br-eno2 proto static
10.20.81.0/24 dev br-eno2 proto kernel scope link src 10.20.81.22
10.104.230.0/24 dev lxdbr0 proto kernel scope link src 10.104.230.1

ubuntu@os-compute03:~$ ip route
default via 10.20.81.254 dev br-eno2 proto static
10.20.81.0/24 dev br-eno2 proto kernel scope link src 10.20.81.23
10.126.34.0/24 dev lxdbr0 proto kernel scope link src 10.126.34.1

ubuntu@os-compute04:~$ ip route
default via 10.20.81.254 dev br-eno2 proto static
10.20.81.0/24 dev br-eno2 proto kernel scope link src 10.20.81.24
10.72.47.0/24 dev lxdbr0 proto kernel scope link src 10.72.47.1


Router:



$:openstack router show u1804Ro
Password:
+-------------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
| Field | Value |
+-------------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
| admin_state_up | UP |
| availability_zone_hints | |
| availability_zones | nova |
| created_at | 2019-02-28T22:27:36Z |
| description | |
| distributed | False |
| external_gateway_info | "network_id": "e2ba9320-b1cb-4fd8-acd8-b4d9df9df819", "enable_snat": true, "external_fixed_ips": ["subnet_id": "b3ae37b6-487b-4063-8d69-ec849fd9c9c7", "ip_address": "10.20.81.212"] |
| flavor_id | None |
| ha | False |
| id | fc288112-3fce-405d-9c3f-5451253de4f0 |
| interfaces_info | ["subnet_id": "c7fcfa82-ec70-4917-8f24-7074bf22743b", "ip_address": "10.0.0.1", "port_id": "84693247-3f86-4c84-b0f6-aa8bd95c6c16"] |
| name | u1804Ro |
| project_id | 1f4809b5083549c1a35c4c023487752c |
| revision_number | 8 |
| routes | |
| status | ACTIVE |
| tags | |
| updated_at | 2019-03-01T14:02:46Z |
+-------------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+


Security Group list



$:openstack security group list
Password:
+--------------------------------------+----------+-----------------------------+----------------------------------+
| ID | Name | Description | Project |
+--------------------------------------+----------+-----------------------------+----------------------------------+
| 57f3fbd9-7574-4116-826f-083a1241bc0f | default | Default security group | 3e59e7cde179423abcdce8fe431fbea0 |
| c242b952-8b07-4d25-b24e-ada213cc116f | u1804Sec | Security Group for u1804Pro | 3e59e7cde179423abcdce8fe431fbea0 |
+--------------------------------------+----------+-----------------------------+----------------------------------+


Security Group rule list



$:openstack security group rule list
Password:
+--------------------------------------+-------------+-----------+------------+--------------------------------------+--------------------------------------+
| ID | IP Protocol | IP Range | Port Range | Remote Security Group | Security Group |
+--------------------------------------+-------------+-----------+------------+--------------------------------------+--------------------------------------+
| 07b3bd3f-cc62-409c-bc65-62eea6c7b3ea | None | None | | 57f3fbd9-7574-4116-826f-083a1241bc0f | 57f3fbd9-7574-4116-826f-083a1241bc0f |
| 34216d9f-f5fc-44a3-9e1a-ac52b0cdc334 | None | None | | None | 57f3fbd9-7574-4116-826f-083a1241bc0f |
| 472eff92-c0f8-4a7e-806d-de98fe066d8f | tcp | 0.0.0.0/0 | 22:22 | None | c242b952-8b07-4d25-b24e-ada213cc116f |
| 8f101215-759d-48bc-b665-bd72463ecb3d | None | None | | None | c242b952-8b07-4d25-b24e-ada213cc116f |
| a6a0e040-3cc8-4cc3-bedf-2aa1adc52018 | None | None | | None | 57f3fbd9-7574-4116-826f-083a1241bc0f |
| d4346b18-65b3-49a6-9763-05229e468dac | None | None | | 57f3fbd9-7574-4116-826f-083a1241bc0f | 57f3fbd9-7574-4116-826f-083a1241bc0f |
| dc9f8a32-7315-493a-b8ed-9b5919afc2c8 | None | None | | None | c242b952-8b07-4d25-b24e-ada213cc116f |
+--------------------------------------+-------------+-----------+------------+--------------------------------------+--------------------------------------+


anyone can help me to solve that? thanks in advance










share|improve this question
























  • 1. Don't post images. 2. "My issue is shown in the first picture"? <sarcasm>Looks fine to me</sarcasm>. What is your question? 3. Whar does ip route show on each system?

    – waltinator
    Feb 20 at 16:52















2















I performed a cluster node installation using this guide [OpenStack Charms Deployment Guide].(https://docs.openstack.org/project-deploy-guide/charm-deployment-guide/latest/install-maas.html), where the type of network is a Flat network and the components used are:



  • Maas

  • Juju

  • Openstack.

My lab is the following:



 +-------------+
Firewall
10.20.81.254
+-------------+
|
+-------------------------------------------------------------+
Switch
vlan81 vlan81 vlan81
+-------------------------------------------------------------+
| | || || || ||
+--------------+ +------------+ +------------------+
|Maas+Juju |Juju Gui| |Openstack
|10.20.81.1 |10.20.81.2 |10.20.81.21-24
+--------------+ +-------------+ +------------------+
|
+--------------------------------------------+
Private Subnet-1 Public Subnet-2
10.0.0.0/24 10.20.81.0/24
+---+----+--+ +----+------+
| | +----+ |
| | | | |
| +--------+ VR +-------------+
| | |
+--+-+ +----+
| |
| VM |
| .9 |
| |


my lab:



1 IBM System 3540 M4 Maas (500GB HDD - 8GB RAM - 1 Nic)
1 IBM System 3540 M4 Juju (500GB HDD - 8GB RAM -1 Nic)
4 IBM System 3540 M4 Openstack (500GBx2 HDD - 16GB RAM - 2 Nic)
1 Palo Alto Network Firewall


IP plan:



Public Network: 10.20.81.0/24
Private Network: 10.0.0.0/24

Maas: 10.20.81.1
Juju: 10.20.81.2
Openstack: 10.20.81.21-24
Gateway 10.20.81.254
Private Network 10.0.0.0/24
Instance: 10.0.0.9 - 10.20.81.215 (floating)


enter image description here



Openstack Router:
enter image description here



Openstack Security Group:
enter image description here



Maas route:



$: ip route
default via 10.20.81.254 dev enp2s0 proto static
10.20.81.0/24 dev enp2s0 proto kernel scope link src 10.20.81.1


Juju Controller:



ubuntu@juju-controller:~$ ip route
default via 10.20.81.254 dev enp8s0 proto static
10.20.81.0/24 dev enp8s0 proto kernel scope link src 10.20.81.2


Compute Nodes:



ubuntu@os-compute01:~$ ip route
default via 10.20.81.254 dev br-eno2 proto static
10.20.81.0/24 dev br-eno2 proto kernel scope link src 10.20.81.21
10.38.53.0/24 dev lxdbr0 proto kernel scope link src 10.38.53.1

ubuntu@os-compute02:~$ ip route
default via 10.20.81.254 dev br-eno2 proto static
10.20.81.0/24 dev br-eno2 proto kernel scope link src 10.20.81.22
10.104.230.0/24 dev lxdbr0 proto kernel scope link src 10.104.230.1

ubuntu@os-compute03:~$ ip route
default via 10.20.81.254 dev br-eno2 proto static
10.20.81.0/24 dev br-eno2 proto kernel scope link src 10.20.81.23
10.126.34.0/24 dev lxdbr0 proto kernel scope link src 10.126.34.1

ubuntu@os-compute04:~$ ip route
default via 10.20.81.254 dev br-eno2 proto static
10.20.81.0/24 dev br-eno2 proto kernel scope link src 10.20.81.24
10.72.47.0/24 dev lxdbr0 proto kernel scope link src 10.72.47.1


Router:



$:openstack router show u1804Ro
Password:
+-------------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
| Field | Value |
+-------------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
| admin_state_up | UP |
| availability_zone_hints | |
| availability_zones | nova |
| created_at | 2019-02-28T22:27:36Z |
| description | |
| distributed | False |
| external_gateway_info | "network_id": "e2ba9320-b1cb-4fd8-acd8-b4d9df9df819", "enable_snat": true, "external_fixed_ips": ["subnet_id": "b3ae37b6-487b-4063-8d69-ec849fd9c9c7", "ip_address": "10.20.81.212"] |
| flavor_id | None |
| ha | False |
| id | fc288112-3fce-405d-9c3f-5451253de4f0 |
| interfaces_info | ["subnet_id": "c7fcfa82-ec70-4917-8f24-7074bf22743b", "ip_address": "10.0.0.1", "port_id": "84693247-3f86-4c84-b0f6-aa8bd95c6c16"] |
| name | u1804Ro |
| project_id | 1f4809b5083549c1a35c4c023487752c |
| revision_number | 8 |
| routes | |
| status | ACTIVE |
| tags | |
| updated_at | 2019-03-01T14:02:46Z |
+-------------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+


Security Group list



$:openstack security group list
Password:
+--------------------------------------+----------+-----------------------------+----------------------------------+
| ID | Name | Description | Project |
+--------------------------------------+----------+-----------------------------+----------------------------------+
| 57f3fbd9-7574-4116-826f-083a1241bc0f | default | Default security group | 3e59e7cde179423abcdce8fe431fbea0 |
| c242b952-8b07-4d25-b24e-ada213cc116f | u1804Sec | Security Group for u1804Pro | 3e59e7cde179423abcdce8fe431fbea0 |
+--------------------------------------+----------+-----------------------------+----------------------------------+


Security Group rule list



$:openstack security group rule list
Password:
+--------------------------------------+-------------+-----------+------------+--------------------------------------+--------------------------------------+
| ID | IP Protocol | IP Range | Port Range | Remote Security Group | Security Group |
+--------------------------------------+-------------+-----------+------------+--------------------------------------+--------------------------------------+
| 07b3bd3f-cc62-409c-bc65-62eea6c7b3ea | None | None | | 57f3fbd9-7574-4116-826f-083a1241bc0f | 57f3fbd9-7574-4116-826f-083a1241bc0f |
| 34216d9f-f5fc-44a3-9e1a-ac52b0cdc334 | None | None | | None | 57f3fbd9-7574-4116-826f-083a1241bc0f |
| 472eff92-c0f8-4a7e-806d-de98fe066d8f | tcp | 0.0.0.0/0 | 22:22 | None | c242b952-8b07-4d25-b24e-ada213cc116f |
| 8f101215-759d-48bc-b665-bd72463ecb3d | None | None | | None | c242b952-8b07-4d25-b24e-ada213cc116f |
| a6a0e040-3cc8-4cc3-bedf-2aa1adc52018 | None | None | | None | 57f3fbd9-7574-4116-826f-083a1241bc0f |
| d4346b18-65b3-49a6-9763-05229e468dac | None | None | | 57f3fbd9-7574-4116-826f-083a1241bc0f | 57f3fbd9-7574-4116-826f-083a1241bc0f |
| dc9f8a32-7315-493a-b8ed-9b5919afc2c8 | None | None | | None | c242b952-8b07-4d25-b24e-ada213cc116f |
+--------------------------------------+-------------+-----------+------------+--------------------------------------+--------------------------------------+


anyone can help me to solve that? thanks in advance










share|improve this question
























  • 1. Don't post images. 2. "My issue is shown in the first picture"? <sarcasm>Looks fine to me</sarcasm>. What is your question? 3. Whar does ip route show on each system?

    – waltinator
    Feb 20 at 16:52













2












2








2


1






I performed a cluster node installation using this guide [OpenStack Charms Deployment Guide].(https://docs.openstack.org/project-deploy-guide/charm-deployment-guide/latest/install-maas.html), where the type of network is a Flat network and the components used are:



  • Maas

  • Juju

  • Openstack.

My lab is the following:



 +-------------+
Firewall
10.20.81.254
+-------------+
|
+-------------------------------------------------------------+
Switch
vlan81 vlan81 vlan81
+-------------------------------------------------------------+
| | || || || ||
+--------------+ +------------+ +------------------+
|Maas+Juju |Juju Gui| |Openstack
|10.20.81.1 |10.20.81.2 |10.20.81.21-24
+--------------+ +-------------+ +------------------+
|
+--------------------------------------------+
Private Subnet-1 Public Subnet-2
10.0.0.0/24 10.20.81.0/24
+---+----+--+ +----+------+
| | +----+ |
| | | | |
| +--------+ VR +-------------+
| | |
+--+-+ +----+
| |
| VM |
| .9 |
| |


my lab:



1 IBM System 3540 M4 Maas (500GB HDD - 8GB RAM - 1 Nic)
1 IBM System 3540 M4 Juju (500GB HDD - 8GB RAM -1 Nic)
4 IBM System 3540 M4 Openstack (500GBx2 HDD - 16GB RAM - 2 Nic)
1 Palo Alto Network Firewall


IP plan:



Public Network: 10.20.81.0/24
Private Network: 10.0.0.0/24

Maas: 10.20.81.1
Juju: 10.20.81.2
Openstack: 10.20.81.21-24
Gateway 10.20.81.254
Private Network 10.0.0.0/24
Instance: 10.0.0.9 - 10.20.81.215 (floating)


enter image description here



Openstack Router:
enter image description here



Openstack Security Group:
enter image description here



Maas route:



$: ip route
default via 10.20.81.254 dev enp2s0 proto static
10.20.81.0/24 dev enp2s0 proto kernel scope link src 10.20.81.1


Juju Controller:



ubuntu@juju-controller:~$ ip route
default via 10.20.81.254 dev enp8s0 proto static
10.20.81.0/24 dev enp8s0 proto kernel scope link src 10.20.81.2


Compute Nodes:



ubuntu@os-compute01:~$ ip route
default via 10.20.81.254 dev br-eno2 proto static
10.20.81.0/24 dev br-eno2 proto kernel scope link src 10.20.81.21
10.38.53.0/24 dev lxdbr0 proto kernel scope link src 10.38.53.1

ubuntu@os-compute02:~$ ip route
default via 10.20.81.254 dev br-eno2 proto static
10.20.81.0/24 dev br-eno2 proto kernel scope link src 10.20.81.22
10.104.230.0/24 dev lxdbr0 proto kernel scope link src 10.104.230.1

ubuntu@os-compute03:~$ ip route
default via 10.20.81.254 dev br-eno2 proto static
10.20.81.0/24 dev br-eno2 proto kernel scope link src 10.20.81.23
10.126.34.0/24 dev lxdbr0 proto kernel scope link src 10.126.34.1

ubuntu@os-compute04:~$ ip route
default via 10.20.81.254 dev br-eno2 proto static
10.20.81.0/24 dev br-eno2 proto kernel scope link src 10.20.81.24
10.72.47.0/24 dev lxdbr0 proto kernel scope link src 10.72.47.1


Router:



$:openstack router show u1804Ro
Password:
+-------------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
| Field | Value |
+-------------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
| admin_state_up | UP |
| availability_zone_hints | |
| availability_zones | nova |
| created_at | 2019-02-28T22:27:36Z |
| description | |
| distributed | False |
| external_gateway_info | "network_id": "e2ba9320-b1cb-4fd8-acd8-b4d9df9df819", "enable_snat": true, "external_fixed_ips": ["subnet_id": "b3ae37b6-487b-4063-8d69-ec849fd9c9c7", "ip_address": "10.20.81.212"] |
| flavor_id | None |
| ha | False |
| id | fc288112-3fce-405d-9c3f-5451253de4f0 |
| interfaces_info | ["subnet_id": "c7fcfa82-ec70-4917-8f24-7074bf22743b", "ip_address": "10.0.0.1", "port_id": "84693247-3f86-4c84-b0f6-aa8bd95c6c16"] |
| name | u1804Ro |
| project_id | 1f4809b5083549c1a35c4c023487752c |
| revision_number | 8 |
| routes | |
| status | ACTIVE |
| tags | |
| updated_at | 2019-03-01T14:02:46Z |
+-------------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+


Security Group list



$:openstack security group list
Password:
+--------------------------------------+----------+-----------------------------+----------------------------------+
| ID | Name | Description | Project |
+--------------------------------------+----------+-----------------------------+----------------------------------+
| 57f3fbd9-7574-4116-826f-083a1241bc0f | default | Default security group | 3e59e7cde179423abcdce8fe431fbea0 |
| c242b952-8b07-4d25-b24e-ada213cc116f | u1804Sec | Security Group for u1804Pro | 3e59e7cde179423abcdce8fe431fbea0 |
+--------------------------------------+----------+-----------------------------+----------------------------------+


Security Group rule list



$:openstack security group rule list
Password:
+--------------------------------------+-------------+-----------+------------+--------------------------------------+--------------------------------------+
| ID | IP Protocol | IP Range | Port Range | Remote Security Group | Security Group |
+--------------------------------------+-------------+-----------+------------+--------------------------------------+--------------------------------------+
| 07b3bd3f-cc62-409c-bc65-62eea6c7b3ea | None | None | | 57f3fbd9-7574-4116-826f-083a1241bc0f | 57f3fbd9-7574-4116-826f-083a1241bc0f |
| 34216d9f-f5fc-44a3-9e1a-ac52b0cdc334 | None | None | | None | 57f3fbd9-7574-4116-826f-083a1241bc0f |
| 472eff92-c0f8-4a7e-806d-de98fe066d8f | tcp | 0.0.0.0/0 | 22:22 | None | c242b952-8b07-4d25-b24e-ada213cc116f |
| 8f101215-759d-48bc-b665-bd72463ecb3d | None | None | | None | c242b952-8b07-4d25-b24e-ada213cc116f |
| a6a0e040-3cc8-4cc3-bedf-2aa1adc52018 | None | None | | None | 57f3fbd9-7574-4116-826f-083a1241bc0f |
| d4346b18-65b3-49a6-9763-05229e468dac | None | None | | 57f3fbd9-7574-4116-826f-083a1241bc0f | 57f3fbd9-7574-4116-826f-083a1241bc0f |
| dc9f8a32-7315-493a-b8ed-9b5919afc2c8 | None | None | | None | c242b952-8b07-4d25-b24e-ada213cc116f |
+--------------------------------------+-------------+-----------+------------+--------------------------------------+--------------------------------------+


anyone can help me to solve that? thanks in advance










share|improve this question
















I performed a cluster node installation using this guide [OpenStack Charms Deployment Guide].(https://docs.openstack.org/project-deploy-guide/charm-deployment-guide/latest/install-maas.html), where the type of network is a Flat network and the components used are:



  • Maas

  • Juju

  • Openstack.

My lab is the following:



 +-------------+
Firewall
10.20.81.254
+-------------+
|
+-------------------------------------------------------------+
Switch
vlan81 vlan81 vlan81
+-------------------------------------------------------------+
| | || || || ||
+--------------+ +------------+ +------------------+
|Maas+Juju |Juju Gui| |Openstack
|10.20.81.1 |10.20.81.2 |10.20.81.21-24
+--------------+ +-------------+ +------------------+
|
+--------------------------------------------+
Private Subnet-1 Public Subnet-2
10.0.0.0/24 10.20.81.0/24
+---+----+--+ +----+------+
| | +----+ |
| | | | |
| +--------+ VR +-------------+
| | |
+--+-+ +----+
| |
| VM |
| .9 |
| |


my lab:



1 IBM System 3540 M4 Maas (500GB HDD - 8GB RAM - 1 Nic)
1 IBM System 3540 M4 Juju (500GB HDD - 8GB RAM -1 Nic)
4 IBM System 3540 M4 Openstack (500GBx2 HDD - 16GB RAM - 2 Nic)
1 Palo Alto Network Firewall


IP plan:



Public Network: 10.20.81.0/24
Private Network: 10.0.0.0/24

Maas: 10.20.81.1
Juju: 10.20.81.2
Openstack: 10.20.81.21-24
Gateway 10.20.81.254
Private Network 10.0.0.0/24
Instance: 10.0.0.9 - 10.20.81.215 (floating)


enter image description here



Openstack Router:
enter image description here



Openstack Security Group:
enter image description here



Maas route:



$: ip route
default via 10.20.81.254 dev enp2s0 proto static
10.20.81.0/24 dev enp2s0 proto kernel scope link src 10.20.81.1


Juju Controller:



ubuntu@juju-controller:~$ ip route
default via 10.20.81.254 dev enp8s0 proto static
10.20.81.0/24 dev enp8s0 proto kernel scope link src 10.20.81.2


Compute Nodes:



ubuntu@os-compute01:~$ ip route
default via 10.20.81.254 dev br-eno2 proto static
10.20.81.0/24 dev br-eno2 proto kernel scope link src 10.20.81.21
10.38.53.0/24 dev lxdbr0 proto kernel scope link src 10.38.53.1

ubuntu@os-compute02:~$ ip route
default via 10.20.81.254 dev br-eno2 proto static
10.20.81.0/24 dev br-eno2 proto kernel scope link src 10.20.81.22
10.104.230.0/24 dev lxdbr0 proto kernel scope link src 10.104.230.1

ubuntu@os-compute03:~$ ip route
default via 10.20.81.254 dev br-eno2 proto static
10.20.81.0/24 dev br-eno2 proto kernel scope link src 10.20.81.23
10.126.34.0/24 dev lxdbr0 proto kernel scope link src 10.126.34.1

ubuntu@os-compute04:~$ ip route
default via 10.20.81.254 dev br-eno2 proto static
10.20.81.0/24 dev br-eno2 proto kernel scope link src 10.20.81.24
10.72.47.0/24 dev lxdbr0 proto kernel scope link src 10.72.47.1


Router:



$:openstack router show u1804Ro
Password:
+-------------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
| Field | Value |
+-------------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
| admin_state_up | UP |
| availability_zone_hints | |
| availability_zones | nova |
| created_at | 2019-02-28T22:27:36Z |
| description | |
| distributed | False |
| external_gateway_info | "network_id": "e2ba9320-b1cb-4fd8-acd8-b4d9df9df819", "enable_snat": true, "external_fixed_ips": ["subnet_id": "b3ae37b6-487b-4063-8d69-ec849fd9c9c7", "ip_address": "10.20.81.212"] |
| flavor_id | None |
| ha | False |
| id | fc288112-3fce-405d-9c3f-5451253de4f0 |
| interfaces_info | ["subnet_id": "c7fcfa82-ec70-4917-8f24-7074bf22743b", "ip_address": "10.0.0.1", "port_id": "84693247-3f86-4c84-b0f6-aa8bd95c6c16"] |
| name | u1804Ro |
| project_id | 1f4809b5083549c1a35c4c023487752c |
| revision_number | 8 |
| routes | |
| status | ACTIVE |
| tags | |
| updated_at | 2019-03-01T14:02:46Z |
+-------------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+


Security Group list



$:openstack security group list
Password:
+--------------------------------------+----------+-----------------------------+----------------------------------+
| ID | Name | Description | Project |
+--------------------------------------+----------+-----------------------------+----------------------------------+
| 57f3fbd9-7574-4116-826f-083a1241bc0f | default | Default security group | 3e59e7cde179423abcdce8fe431fbea0 |
| c242b952-8b07-4d25-b24e-ada213cc116f | u1804Sec | Security Group for u1804Pro | 3e59e7cde179423abcdce8fe431fbea0 |
+--------------------------------------+----------+-----------------------------+----------------------------------+


Security Group rule list



$:openstack security group rule list
Password:
+--------------------------------------+-------------+-----------+------------+--------------------------------------+--------------------------------------+
| ID | IP Protocol | IP Range | Port Range | Remote Security Group | Security Group |
+--------------------------------------+-------------+-----------+------------+--------------------------------------+--------------------------------------+
| 07b3bd3f-cc62-409c-bc65-62eea6c7b3ea | None | None | | 57f3fbd9-7574-4116-826f-083a1241bc0f | 57f3fbd9-7574-4116-826f-083a1241bc0f |
| 34216d9f-f5fc-44a3-9e1a-ac52b0cdc334 | None | None | | None | 57f3fbd9-7574-4116-826f-083a1241bc0f |
| 472eff92-c0f8-4a7e-806d-de98fe066d8f | tcp | 0.0.0.0/0 | 22:22 | None | c242b952-8b07-4d25-b24e-ada213cc116f |
| 8f101215-759d-48bc-b665-bd72463ecb3d | None | None | | None | c242b952-8b07-4d25-b24e-ada213cc116f |
| a6a0e040-3cc8-4cc3-bedf-2aa1adc52018 | None | None | | None | 57f3fbd9-7574-4116-826f-083a1241bc0f |
| d4346b18-65b3-49a6-9763-05229e468dac | None | None | | 57f3fbd9-7574-4116-826f-083a1241bc0f | 57f3fbd9-7574-4116-826f-083a1241bc0f |
| dc9f8a32-7315-493a-b8ed-9b5919afc2c8 | None | None | | None | c242b952-8b07-4d25-b24e-ada213cc116f |
+--------------------------------------+-------------+-----------+------------+--------------------------------------+--------------------------------------+


anyone can help me to solve that? thanks in advance







juju maas openstack ping






share|improve this question















share|improve this question













share|improve this question




share|improve this question








edited 1 hour ago







Riccardo Magrini

















asked Oct 15 '18 at 15:26









Riccardo MagriniRiccardo Magrini

73531326




73531326












  • 1. Don't post images. 2. "My issue is shown in the first picture"? <sarcasm>Looks fine to me</sarcasm>. What is your question? 3. Whar does ip route show on each system?

    – waltinator
    Feb 20 at 16:52

















  • 1. Don't post images. 2. "My issue is shown in the first picture"? <sarcasm>Looks fine to me</sarcasm>. What is your question? 3. Whar does ip route show on each system?

    – waltinator
    Feb 20 at 16:52
















1. Don't post images. 2. "My issue is shown in the first picture"? <sarcasm>Looks fine to me</sarcasm>. What is your question? 3. Whar does ip route show on each system?

– waltinator
Feb 20 at 16:52





1. Don't post images. 2. "My issue is shown in the first picture"? <sarcasm>Looks fine to me</sarcasm>. What is your question? 3. Whar does ip route show on each system?

– waltinator
Feb 20 at 16:52










1 Answer
1






active

oldest

votes


















0














update 23/03/19:



I can ping the virtual eths from neutron-gateway:



From MAAS



$: juju ssh neutron-gateway/0


then



ubuntu@os-compute01:~$ ip netns list
qrouter-fc288112-3fce-405d-9c3f-5451253de4f0 (id: 4)
qdhcp-feb5596f-b201-4e01-9c04-64abd1273d2f (id: 3)


ping result on the eth on router:



ubuntu@os-compute01:~$ ip netns exec qrouter-fc288112-3fce-405d-9c3f-5451253de4f0 ping 10.20.81.212
PING 10.20.81.212 (10.20.81.212) 56(84) bytes of data.
64 bytes from 10.20.81.212: icmp_seq=1 ttl=64 time=0.085 ms
64 bytes from 10.20.81.212: icmp_seq=2 ttl=64 time=0.054 ms

ubuntu@os-compute01:~$ sudo ip netns exec qdhcp-feb5596f-b201-4e01-9c04-64abd1273d2f ping 10.0.0.2
PING 10.0.0.1 (10.0.0.2) 56(84) bytes of data.
64 bytes from 10.0.0.2: icmp_seq=1 ttl=64 time=1.32 ms
64 bytes from 10.0.0.2: icmp_seq=2 ttl=64 time=0.096 ms


if I try to ping the instance or its floating IP assigned, they're unreachable



ubuntu@os-compute01:~$ sudo ip netns exec qdhcp-feb5596f-b201-4e01-9c04-64abd1273d2f ping 10.0.0.9
PING 10.0.0.9 (10.0.0.9) 56(84) bytes of data.
From 10.0.0.2 icmp_seq=1 Destination Host Unreachable
From 10.0.0.2 icmp_seq=2 Destination Host Unreachable

ubuntu@os-compute01:~$ sudo ip netns exec qrouter-fc288112-3fce-405d-9c3f-5451253de4f0 ping 10.20.81.215
PING 10.20.81.215 (10.20.81.215) 56(84) bytes of data.
From 10.20.81.215 icmp_seq=1 Destination Host Unreachable
From 10.20.81.215 icmp_seq=2 Destination Host Unreachable


its route is:



ubuntu@os-compute03:~$ sudo ip netns exec qrouter-fc288112-3fce-405d-9c3f-5451253de4f0 ip route
default via 10.20.81.254 dev qg-2af6bb57-15
10.0.0.0/24 dev qr-b089085a-11 proto kernel scope link src 10.0.0.1
10.20.81.0/24 dev qg-2af6bb57-15 proto kernel scope link src 10.20.81.212


ping the Gateway from neutron-gateway:



ubuntu@os-compute03:~$ sudo ip netns qrouter-fc288112-3fce-405d-9c3f-5451253de4f0 ping 10.20.81.254
PING 10.20.81.254 (10.20.81.254) 56(84) bytes of data.
From 10.20.81.222 icmp_seq=1 Destination Host Unreachable
From 10.20.81.222 icmp_seq=2 Destination Host Unreachable


Update 01/04/19:



Changing the type of image uploaded on Opentstack, from LXD (bionic-server-cloudimg-amd64-lxd.tar.) to IMG (bionic-server-cloudimg-amd64.img), the ping now is working fine.



ubuntu@os-compute01:~$ sudo ip netns exec qrouter-fc288112-3fce-405d-9c3f-5451253de4f0 ping 10.0.0.9
PING 10.0.0.9 (10.0.0.9) 56(84) bytes of data.
64 bytes from 10.0.0.9: icmp_seq=1 ttl=64 time=0.075 ms
64 bytes from 10.0.0.9: icmp_seq=2 ttl=64 time=0.070 ms


the rest of sets on Openstack are the same used to the begin.






share|improve this answer

























    Your Answer








    StackExchange.ready(function()
    var channelOptions =
    tags: "".split(" "),
    id: "89"
    ;
    initTagRenderer("".split(" "), "".split(" "), channelOptions);

    StackExchange.using("externalEditor", function()
    // Have to fire editor after snippets, if snippets enabled
    if (StackExchange.settings.snippets.snippetsEnabled)
    StackExchange.using("snippets", function()
    createEditor();
    );

    else
    createEditor();

    );

    function createEditor()
    StackExchange.prepareEditor(
    heartbeatType: 'answer',
    autoActivateHeartbeat: false,
    convertImagesToLinks: true,
    noModals: true,
    showLowRepImageUploadWarning: true,
    reputationToPostImages: 10,
    bindNavPrevention: true,
    postfix: "",
    imageUploader:
    brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
    contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
    allowUrls: true
    ,
    onDemand: true,
    discardSelector: ".discard-answer"
    ,immediatelyShowMarkdownHelp:true
    );



    );













    draft saved

    draft discarded


















    StackExchange.ready(
    function ()
    StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1083964%2fopenstack-no-ping-to-instance-from-neutron-gateway-0-error-destination-host%23new-answer', 'question_page');

    );

    Post as a guest















    Required, but never shown

























    1 Answer
    1






    active

    oldest

    votes








    1 Answer
    1






    active

    oldest

    votes









    active

    oldest

    votes






    active

    oldest

    votes









    0














    update 23/03/19:



    I can ping the virtual eths from neutron-gateway:



    From MAAS



    $: juju ssh neutron-gateway/0


    then



    ubuntu@os-compute01:~$ ip netns list
    qrouter-fc288112-3fce-405d-9c3f-5451253de4f0 (id: 4)
    qdhcp-feb5596f-b201-4e01-9c04-64abd1273d2f (id: 3)


    ping result on the eth on router:



    ubuntu@os-compute01:~$ ip netns exec qrouter-fc288112-3fce-405d-9c3f-5451253de4f0 ping 10.20.81.212
    PING 10.20.81.212 (10.20.81.212) 56(84) bytes of data.
    64 bytes from 10.20.81.212: icmp_seq=1 ttl=64 time=0.085 ms
    64 bytes from 10.20.81.212: icmp_seq=2 ttl=64 time=0.054 ms

    ubuntu@os-compute01:~$ sudo ip netns exec qdhcp-feb5596f-b201-4e01-9c04-64abd1273d2f ping 10.0.0.2
    PING 10.0.0.1 (10.0.0.2) 56(84) bytes of data.
    64 bytes from 10.0.0.2: icmp_seq=1 ttl=64 time=1.32 ms
    64 bytes from 10.0.0.2: icmp_seq=2 ttl=64 time=0.096 ms


    if I try to ping the instance or its floating IP assigned, they're unreachable



    ubuntu@os-compute01:~$ sudo ip netns exec qdhcp-feb5596f-b201-4e01-9c04-64abd1273d2f ping 10.0.0.9
    PING 10.0.0.9 (10.0.0.9) 56(84) bytes of data.
    From 10.0.0.2 icmp_seq=1 Destination Host Unreachable
    From 10.0.0.2 icmp_seq=2 Destination Host Unreachable

    ubuntu@os-compute01:~$ sudo ip netns exec qrouter-fc288112-3fce-405d-9c3f-5451253de4f0 ping 10.20.81.215
    PING 10.20.81.215 (10.20.81.215) 56(84) bytes of data.
    From 10.20.81.215 icmp_seq=1 Destination Host Unreachable
    From 10.20.81.215 icmp_seq=2 Destination Host Unreachable


    its route is:



    ubuntu@os-compute03:~$ sudo ip netns exec qrouter-fc288112-3fce-405d-9c3f-5451253de4f0 ip route
    default via 10.20.81.254 dev qg-2af6bb57-15
    10.0.0.0/24 dev qr-b089085a-11 proto kernel scope link src 10.0.0.1
    10.20.81.0/24 dev qg-2af6bb57-15 proto kernel scope link src 10.20.81.212


    ping the Gateway from neutron-gateway:



    ubuntu@os-compute03:~$ sudo ip netns qrouter-fc288112-3fce-405d-9c3f-5451253de4f0 ping 10.20.81.254
    PING 10.20.81.254 (10.20.81.254) 56(84) bytes of data.
    From 10.20.81.222 icmp_seq=1 Destination Host Unreachable
    From 10.20.81.222 icmp_seq=2 Destination Host Unreachable


    Update 01/04/19:



    Changing the type of image uploaded on Opentstack, from LXD (bionic-server-cloudimg-amd64-lxd.tar.) to IMG (bionic-server-cloudimg-amd64.img), the ping now is working fine.



    ubuntu@os-compute01:~$ sudo ip netns exec qrouter-fc288112-3fce-405d-9c3f-5451253de4f0 ping 10.0.0.9
    PING 10.0.0.9 (10.0.0.9) 56(84) bytes of data.
    64 bytes from 10.0.0.9: icmp_seq=1 ttl=64 time=0.075 ms
    64 bytes from 10.0.0.9: icmp_seq=2 ttl=64 time=0.070 ms


    the rest of sets on Openstack are the same used to the begin.






    share|improve this answer





























      0














      update 23/03/19:



      I can ping the virtual eths from neutron-gateway:



      From MAAS



      $: juju ssh neutron-gateway/0


      then



      ubuntu@os-compute01:~$ ip netns list
      qrouter-fc288112-3fce-405d-9c3f-5451253de4f0 (id: 4)
      qdhcp-feb5596f-b201-4e01-9c04-64abd1273d2f (id: 3)


      ping result on the eth on router:



      ubuntu@os-compute01:~$ ip netns exec qrouter-fc288112-3fce-405d-9c3f-5451253de4f0 ping 10.20.81.212
      PING 10.20.81.212 (10.20.81.212) 56(84) bytes of data.
      64 bytes from 10.20.81.212: icmp_seq=1 ttl=64 time=0.085 ms
      64 bytes from 10.20.81.212: icmp_seq=2 ttl=64 time=0.054 ms

      ubuntu@os-compute01:~$ sudo ip netns exec qdhcp-feb5596f-b201-4e01-9c04-64abd1273d2f ping 10.0.0.2
      PING 10.0.0.1 (10.0.0.2) 56(84) bytes of data.
      64 bytes from 10.0.0.2: icmp_seq=1 ttl=64 time=1.32 ms
      64 bytes from 10.0.0.2: icmp_seq=2 ttl=64 time=0.096 ms


      if I try to ping the instance or its floating IP assigned, they're unreachable



      ubuntu@os-compute01:~$ sudo ip netns exec qdhcp-feb5596f-b201-4e01-9c04-64abd1273d2f ping 10.0.0.9
      PING 10.0.0.9 (10.0.0.9) 56(84) bytes of data.
      From 10.0.0.2 icmp_seq=1 Destination Host Unreachable
      From 10.0.0.2 icmp_seq=2 Destination Host Unreachable

      ubuntu@os-compute01:~$ sudo ip netns exec qrouter-fc288112-3fce-405d-9c3f-5451253de4f0 ping 10.20.81.215
      PING 10.20.81.215 (10.20.81.215) 56(84) bytes of data.
      From 10.20.81.215 icmp_seq=1 Destination Host Unreachable
      From 10.20.81.215 icmp_seq=2 Destination Host Unreachable


      its route is:



      ubuntu@os-compute03:~$ sudo ip netns exec qrouter-fc288112-3fce-405d-9c3f-5451253de4f0 ip route
      default via 10.20.81.254 dev qg-2af6bb57-15
      10.0.0.0/24 dev qr-b089085a-11 proto kernel scope link src 10.0.0.1
      10.20.81.0/24 dev qg-2af6bb57-15 proto kernel scope link src 10.20.81.212


      ping the Gateway from neutron-gateway:



      ubuntu@os-compute03:~$ sudo ip netns qrouter-fc288112-3fce-405d-9c3f-5451253de4f0 ping 10.20.81.254
      PING 10.20.81.254 (10.20.81.254) 56(84) bytes of data.
      From 10.20.81.222 icmp_seq=1 Destination Host Unreachable
      From 10.20.81.222 icmp_seq=2 Destination Host Unreachable


      Update 01/04/19:



      Changing the type of image uploaded on Opentstack, from LXD (bionic-server-cloudimg-amd64-lxd.tar.) to IMG (bionic-server-cloudimg-amd64.img), the ping now is working fine.



      ubuntu@os-compute01:~$ sudo ip netns exec qrouter-fc288112-3fce-405d-9c3f-5451253de4f0 ping 10.0.0.9
      PING 10.0.0.9 (10.0.0.9) 56(84) bytes of data.
      64 bytes from 10.0.0.9: icmp_seq=1 ttl=64 time=0.075 ms
      64 bytes from 10.0.0.9: icmp_seq=2 ttl=64 time=0.070 ms


      the rest of sets on Openstack are the same used to the begin.






      share|improve this answer



























        0












        0








        0







        update 23/03/19:



        I can ping the virtual eths from neutron-gateway:



        From MAAS



        $: juju ssh neutron-gateway/0


        then



        ubuntu@os-compute01:~$ ip netns list
        qrouter-fc288112-3fce-405d-9c3f-5451253de4f0 (id: 4)
        qdhcp-feb5596f-b201-4e01-9c04-64abd1273d2f (id: 3)


        ping result on the eth on router:



        ubuntu@os-compute01:~$ ip netns exec qrouter-fc288112-3fce-405d-9c3f-5451253de4f0 ping 10.20.81.212
        PING 10.20.81.212 (10.20.81.212) 56(84) bytes of data.
        64 bytes from 10.20.81.212: icmp_seq=1 ttl=64 time=0.085 ms
        64 bytes from 10.20.81.212: icmp_seq=2 ttl=64 time=0.054 ms

        ubuntu@os-compute01:~$ sudo ip netns exec qdhcp-feb5596f-b201-4e01-9c04-64abd1273d2f ping 10.0.0.2
        PING 10.0.0.1 (10.0.0.2) 56(84) bytes of data.
        64 bytes from 10.0.0.2: icmp_seq=1 ttl=64 time=1.32 ms
        64 bytes from 10.0.0.2: icmp_seq=2 ttl=64 time=0.096 ms


        if I try to ping the instance or its floating IP assigned, they're unreachable



        ubuntu@os-compute01:~$ sudo ip netns exec qdhcp-feb5596f-b201-4e01-9c04-64abd1273d2f ping 10.0.0.9
        PING 10.0.0.9 (10.0.0.9) 56(84) bytes of data.
        From 10.0.0.2 icmp_seq=1 Destination Host Unreachable
        From 10.0.0.2 icmp_seq=2 Destination Host Unreachable

        ubuntu@os-compute01:~$ sudo ip netns exec qrouter-fc288112-3fce-405d-9c3f-5451253de4f0 ping 10.20.81.215
        PING 10.20.81.215 (10.20.81.215) 56(84) bytes of data.
        From 10.20.81.215 icmp_seq=1 Destination Host Unreachable
        From 10.20.81.215 icmp_seq=2 Destination Host Unreachable


        its route is:



        ubuntu@os-compute03:~$ sudo ip netns exec qrouter-fc288112-3fce-405d-9c3f-5451253de4f0 ip route
        default via 10.20.81.254 dev qg-2af6bb57-15
        10.0.0.0/24 dev qr-b089085a-11 proto kernel scope link src 10.0.0.1
        10.20.81.0/24 dev qg-2af6bb57-15 proto kernel scope link src 10.20.81.212


        ping the Gateway from neutron-gateway:



        ubuntu@os-compute03:~$ sudo ip netns qrouter-fc288112-3fce-405d-9c3f-5451253de4f0 ping 10.20.81.254
        PING 10.20.81.254 (10.20.81.254) 56(84) bytes of data.
        From 10.20.81.222 icmp_seq=1 Destination Host Unreachable
        From 10.20.81.222 icmp_seq=2 Destination Host Unreachable


        Update 01/04/19:



        Changing the type of image uploaded on Opentstack, from LXD (bionic-server-cloudimg-amd64-lxd.tar.) to IMG (bionic-server-cloudimg-amd64.img), the ping now is working fine.



        ubuntu@os-compute01:~$ sudo ip netns exec qrouter-fc288112-3fce-405d-9c3f-5451253de4f0 ping 10.0.0.9
        PING 10.0.0.9 (10.0.0.9) 56(84) bytes of data.
        64 bytes from 10.0.0.9: icmp_seq=1 ttl=64 time=0.075 ms
        64 bytes from 10.0.0.9: icmp_seq=2 ttl=64 time=0.070 ms


        the rest of sets on Openstack are the same used to the begin.






        share|improve this answer















        update 23/03/19:



        I can ping the virtual eths from neutron-gateway:



        From MAAS



        $: juju ssh neutron-gateway/0


        then



        ubuntu@os-compute01:~$ ip netns list
        qrouter-fc288112-3fce-405d-9c3f-5451253de4f0 (id: 4)
        qdhcp-feb5596f-b201-4e01-9c04-64abd1273d2f (id: 3)


        ping result on the eth on router:



        ubuntu@os-compute01:~$ ip netns exec qrouter-fc288112-3fce-405d-9c3f-5451253de4f0 ping 10.20.81.212
        PING 10.20.81.212 (10.20.81.212) 56(84) bytes of data.
        64 bytes from 10.20.81.212: icmp_seq=1 ttl=64 time=0.085 ms
        64 bytes from 10.20.81.212: icmp_seq=2 ttl=64 time=0.054 ms

        ubuntu@os-compute01:~$ sudo ip netns exec qdhcp-feb5596f-b201-4e01-9c04-64abd1273d2f ping 10.0.0.2
        PING 10.0.0.1 (10.0.0.2) 56(84) bytes of data.
        64 bytes from 10.0.0.2: icmp_seq=1 ttl=64 time=1.32 ms
        64 bytes from 10.0.0.2: icmp_seq=2 ttl=64 time=0.096 ms


        if I try to ping the instance or its floating IP assigned, they're unreachable



        ubuntu@os-compute01:~$ sudo ip netns exec qdhcp-feb5596f-b201-4e01-9c04-64abd1273d2f ping 10.0.0.9
        PING 10.0.0.9 (10.0.0.9) 56(84) bytes of data.
        From 10.0.0.2 icmp_seq=1 Destination Host Unreachable
        From 10.0.0.2 icmp_seq=2 Destination Host Unreachable

        ubuntu@os-compute01:~$ sudo ip netns exec qrouter-fc288112-3fce-405d-9c3f-5451253de4f0 ping 10.20.81.215
        PING 10.20.81.215 (10.20.81.215) 56(84) bytes of data.
        From 10.20.81.215 icmp_seq=1 Destination Host Unreachable
        From 10.20.81.215 icmp_seq=2 Destination Host Unreachable


        its route is:



        ubuntu@os-compute03:~$ sudo ip netns exec qrouter-fc288112-3fce-405d-9c3f-5451253de4f0 ip route
        default via 10.20.81.254 dev qg-2af6bb57-15
        10.0.0.0/24 dev qr-b089085a-11 proto kernel scope link src 10.0.0.1
        10.20.81.0/24 dev qg-2af6bb57-15 proto kernel scope link src 10.20.81.212


        ping the Gateway from neutron-gateway:



        ubuntu@os-compute03:~$ sudo ip netns qrouter-fc288112-3fce-405d-9c3f-5451253de4f0 ping 10.20.81.254
        PING 10.20.81.254 (10.20.81.254) 56(84) bytes of data.
        From 10.20.81.222 icmp_seq=1 Destination Host Unreachable
        From 10.20.81.222 icmp_seq=2 Destination Host Unreachable


        Update 01/04/19:



        Changing the type of image uploaded on Opentstack, from LXD (bionic-server-cloudimg-amd64-lxd.tar.) to IMG (bionic-server-cloudimg-amd64.img), the ping now is working fine.



        ubuntu@os-compute01:~$ sudo ip netns exec qrouter-fc288112-3fce-405d-9c3f-5451253de4f0 ping 10.0.0.9
        PING 10.0.0.9 (10.0.0.9) 56(84) bytes of data.
        64 bytes from 10.0.0.9: icmp_seq=1 ttl=64 time=0.075 ms
        64 bytes from 10.0.0.9: icmp_seq=2 ttl=64 time=0.070 ms


        the rest of sets on Openstack are the same used to the begin.







        share|improve this answer














        share|improve this answer



        share|improve this answer








        edited 58 mins ago

























        answered Mar 1 at 14:37









        Riccardo MagriniRiccardo Magrini

        73531326




        73531326



























            draft saved

            draft discarded
















































            Thanks for contributing an answer to Ask Ubuntu!


            • Please be sure to answer the question. Provide details and share your research!

            But avoid


            • Asking for help, clarification, or responding to other answers.

            • Making statements based on opinion; back them up with references or personal experience.

            To learn more, see our tips on writing great answers.




            draft saved


            draft discarded














            StackExchange.ready(
            function ()
            StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1083964%2fopenstack-no-ping-to-instance-from-neutron-gateway-0-error-destination-host%23new-answer', 'question_page');

            );

            Post as a guest















            Required, but never shown





















































            Required, but never shown














            Required, but never shown












            Required, but never shown







            Required, but never shown

































            Required, but never shown














            Required, but never shown












            Required, but never shown







            Required, but never shown







            Popular posts from this blog

            Are there any comparative studies done between Ashtavakra Gita and Buddhim?How is it wrong to believe that a self exists, or that it doesn't?Can you criticise or improve Ven. Bodhi's description of MahayanaWas the doctrine of 'Anatta', accepted as doctrine by modern Buddhism, actually taught by the Buddha?Relationship between Buddhism, Hinduism and Yoga?Comparison of Nirvana, Tao and Brahman/AtmaIs there a distinction between “ego identity” and “craving/hating”?Are there many differences between Taoism and Buddhism?Loss of “faith” in buddhismSimilarity between creation in Abrahamic religions and beginning of life in Earth mentioned Agganna Sutta?Are there studies about the difference between meditating in the morning versus in the evening?Can one follow Hinduism and Buddhism at the same time?Are there any prohibitions on participating in other religion's practices?Psychology of 'flow'

            fallocate: fallocate failed: Text file busy in Ubuntu 17.04? Announcing the arrival of Valued Associate #679: Cesar Manara Planned maintenance scheduled April 17/18, 2019 at 00:00UTC (8:00pm US/Eastern)defragmenting and increasing performance of old lubuntu system with swap partitionIssue with increasing the root partition from the swapthis /usr/bin/dpkg returned error || ubuntu-16.04, 64bitDefault 17.04 swap file locationHow to Resize Ubuntu 17.04 Zesty Swap file size?Ubuntu freezes from online formsMy Laptop is not starting after upgrade ubuntu 16.04 (Kernel 4.8.0-38 to 04.10.0-36)hcp: ERROR: FALLOCATE FAILED!Not sure my swap is being usedWine 3.0 asking for more virtual free swap

            Where is the suspend/hibernate button in GNOME Shell? Announcing the arrival of Valued Associate #679: Cesar Manara Planned maintenance scheduled April 23, 2019 at 23:30 UTC (7:30pm US/Eastern)No suspend option in UI on Bionic BeaverHow can I set sleep mode in ubuntu18.04 LTS and what is the short cut key to do so?17.10 suspend not availableUbuntu 18.04 LTS missing sleep optionUbuntu 18.04 LTS - missing suspend option when power button is pressedHow to put Thinkpad X1 Extreme to sleep in Ubuntu 18.10?Suspend Button in interactive power button menu18.04 - Keep programs running after logging outway to disable Hibernate from within gconf-editor so button disappears?How can I hibernate from GNOME Shell?How can I hibernate/suspend from the command line and do so at a specific timeNo permission to suspend/hibernate after upgrading to 12.10MATE - Missing Suspend and Hibernate buttons, pressing power button shutdowns system immediatelyUbuntu 14.04: Suspend, Hibernate and Suspend-hybrid in the menu?Change “power-button-action” comand for “hibernate” option in GNOME 3.18Shutdown / Power off button does always go to suspend on 17.10Hibernate after suspend stopped working in 17.10Why doesn't the keyboard screenshot button work on Ubuntu with GNOME shell?