Ubuntu 12.04 does not recognize Kingston DT108 16GB USB drive12.04 doesn't recognize pendriveUbuntu does not recognize added RAMUSB Drive inaccesible in Ubuntu 12.04Ubuntu does not recognize USBUbuntu does not recognize 8GB of RAMUSB pen (Kingston 16GB) is not detecting / mount in the system (Ubuntu 12.10 or Windows)WD 3T usb 3 external failed mount at boot timeUbuntu 14.10 recognizes, but does not show the USB stickUbuntu 18.04 error on waking up from sleep : Read-error on swap device16GB USB flash drive does not work
GFCI outlets - can they be repaired? Are they really needed at the end of a circuit?
How do I handle a potential work/personal life conflict as the manager of one of my friends?
Do UK voters know if their MP will be the Speaker of the House?
Why do bosons tend to occupy the same state?
Why is consensus so controversial in Britain?
Plagiarism or not?
What exploit Are these user agents trying to use?
Im going to France and my passport expires June 19th
Can we compute the area of a quadrilateral with one right angle when we only know the lengths of any three sides?
What method can I use to design a dungeon difficult enough that the PCs can't make it through without killing them?
Are there any examples of a variable being normally distributed that is *not* due to the Central Limit Theorem?
Should I cover my bicycle overnight while bikepacking?
Is it possible to create a QR code using text?
Why didn't Miles's spider sense work before?
What does “the session was packed” mean in this context?
Venezuelan girlfriend wants to travel the USA to be with me. What is the process?
Can I run a new neutral wire to repair a broken circuit?
How writing a dominant 7 sus4 chord in RNA ( Vsus7 chord in the 1st inversion)
In 'Revenger,' what does 'cove' come from?
Short story with a alien planet, government officials must wear exploding medallions
Bullying boss launched a smear campaign and made me unemployable
Why didn't Boeing produce its own regional jet?
Examples of smooth manifolds admitting inbetween one and a continuum of complex structures
Why would the Red Woman birth a shadow if she worshipped the Lord of the Light?
Ubuntu 12.04 does not recognize Kingston DT108 16GB USB drive
12.04 doesn't recognize pendriveUbuntu does not recognize added RAMUSB Drive inaccesible in Ubuntu 12.04Ubuntu does not recognize USBUbuntu does not recognize 8GB of RAMUSB pen (Kingston 16GB) is not detecting / mount in the system (Ubuntu 12.10 or Windows)WD 3T usb 3 external failed mount at boot timeUbuntu 14.10 recognizes, but does not show the USB stickUbuntu 18.04 error on waking up from sleep : Read-error on swap device16GB USB flash drive does not work
I bought a Kingston DT108 16GB USB pen drive and Ubuntu did not recognize it. What should i do?
Output of dmesg | tail after connecting pen drive:
[ 1455.253010] CPU5: Package power limit notification (total events = 488)
[ 1455.253013] CPU1: Package power limit notification (total events = 489)
[ 1455.263966] CPU4: Package power limit normal
[ 1455.263969] CPU2: Package power limit normal
[ 1455.263972] CPU0: Package power limit normal
[ 1455.263975] CPU6: Package power limit normal
[ 1455.263998] CPU1: Package power limit normal
[ 1455.264001] CPU5: Package power limit normal
[ 1455.264004] CPU7: Package power limit normal
[ 1455.264007] CPU3: Package power limit normal
12.04 usb-drive ram
edited Nov 10 '13 at 0:52
karel
60.7k13132155
asked May 2 '12 at 12:35
aceqottaceqott
6429
bumped to the homepage by Community♦ 44 mins ago
This question has answers that may be good or bad; the system has marked it active so that they can be reviewed.
add a comment |
I bought a Kingston DT108 16GB USB pen drive and Ubuntu did not recognize it. What should i do?
Output of dmesg | tail after connecting pen drive:
[ 1455.253010] CPU5: Package power limit notification (total events = 488)
[ 1455.253013] CPU1: Package power limit notification (total events = 489)
[ 1455.263966] CPU4: Package power limit normal
[ 1455.263969] CPU2: Package power limit normal
[ 1455.263972] CPU0: Package power limit normal
[ 1455.263975] CPU6: Package power limit normal
[ 1455.263998] CPU1: Package power limit normal
[ 1455.264001] CPU5: Package power limit normal
[ 1455.264004] CPU7: Package power limit normal
[ 1455.264007] CPU3: Package power limit normal
12.04 usb-drive ram
edited Nov 10 '13 at 0:52
karel
60.7k13132155
asked May 2 '12 at 12:35
aceqottaceqott
6429
bumped to the homepage by Community♦ 44 mins ago
This question has answers that may be good or bad; the system has marked it active so that they can be reviewed.
What is the output of "dmesg | tail" after connecting your pen drive?
– harisibrahimkv
May 2 '12 at 12:38
[ 1455.253010] CPU5: Package power limit notification (total events = 488) [ 1455.253013] CPU1: Package power limit notification (total events = 489) [ 1455.263966] CPU4: Package power limit normal [ 1455.263969] CPU2: Package power limit normal [ 1455.263972] CPU0: Package power limit normal [ 1455.263975] CPU6: Package power limit normal [ 1455.263998] CPU1: Package power limit normal [ 1455.264001] CPU5: Package power limit normal [ 1455.264004] CPU7: Package power limit normal [ 1455.264007] CPU3: Package power limit normal
– aceqott
May 2 '12 at 12:39
Weird. I was hoping that there would be some trace of kernel log that said it had at least seen a device plugged in... I'm sorry I can't help you much here.
– harisibrahimkv
May 2 '12 at 12:42
add a comment |
I bought a Kingston DT108 16GB USB pen drive and Ubuntu did not recognize it. What should i do?
Output of dmesg | tail after connecting pen drive:
[ 1455.253010] CPU5: Package power limit notification (total events = 488)
[ 1455.253013] CPU1: Package power limit notification (total events = 489)
[ 1455.263966] CPU4: Package power limit normal
[ 1455.263969] CPU2: Package power limit normal
[ 1455.263972] CPU0: Package power limit normal
[ 1455.263975] CPU6: Package power limit normal
[ 1455.263998] CPU1: Package power limit normal
[ 1455.264001] CPU5: Package power limit normal
[ 1455.264004] CPU7: Package power limit normal
[ 1455.264007] CPU3: Package power limit normal
12.04 usb-drive ram
edited Nov 10 '13 at 0:52
karel
60.7k13132155
asked May 2 '12 at 12:35
aceqottaceqott
6429
I bought a Kingston DT108 16GB USB pen drive and Ubuntu did not recognize it. What should i do?
Output of dmesg | tail after connecting pen drive:
[ 1455.253010] CPU5: Package power limit notification (total events = 488)
[ 1455.253013] CPU1: Package power limit notification (total events = 489)
[ 1455.263966] CPU4: Package power limit normal
[ 1455.263969] CPU2: Package power limit normal
[ 1455.263972] CPU0: Package power limit normal
[ 1455.263975] CPU6: Package power limit normal
[ 1455.263998] CPU1: Package power limit normal
[ 1455.264001] CPU5: Package power limit normal
[ 1455.264004] CPU7: Package power limit normal
[ 1455.264007] CPU3: Package power limit normal
12.04 usb-drive ram
12.04 usb-drive ram
edited Nov 10 '13 at 0:52
karel
60.7k13132155
asked May 2 '12 at 12:35
aceqottaceqott
6429
edited Nov 10 '13 at 0:52
karel
60.7k13132155
asked May 2 '12 at 12:35
aceqottaceqott
6429
edited Nov 10 '13 at 0:52
karel
60.7k13132155
edited Nov 10 '13 at 0:52
karel
60.7k13132155
edited Nov 10 '13 at 0:52
karel
60.7k13132155
60.7k13132155
asked May 2 '12 at 12:35
aceqottaceqott
6429
asked May 2 '12 at 12:35
aceqottaceqott
6429
asked May 2 '12 at 12:35
aceqottaceqott
6429
6429
bumped to the homepage by Community♦ 44 mins ago
This question has answers that may be good or bad; the system has marked it active so that they can be reviewed.
bumped to the homepage by Community♦ 44 mins ago
This question has answers that may be good or bad; the system has marked it active so that they can be reviewed.
What is the output of "dmesg | tail" after connecting your pen drive?
– harisibrahimkv
May 2 '12 at 12:38
[ 1455.253010] CPU5: Package power limit notification (total events = 488) [ 1455.253013] CPU1: Package power limit notification (total events = 489) [ 1455.263966] CPU4: Package power limit normal [ 1455.263969] CPU2: Package power limit normal [ 1455.263972] CPU0: Package power limit normal [ 1455.263975] CPU6: Package power limit normal [ 1455.263998] CPU1: Package power limit normal [ 1455.264001] CPU5: Package power limit normal [ 1455.264004] CPU7: Package power limit normal [ 1455.264007] CPU3: Package power limit normal
– aceqott
May 2 '12 at 12:39
Weird. I was hoping that there would be some trace of kernel log that said it had at least seen a device plugged in... I'm sorry I can't help you much here.
– harisibrahimkv
May 2 '12 at 12:42
add a comment |
What is the output of "dmesg | tail" after connecting your pen drive?
– harisibrahimkv
May 2 '12 at 12:38
[ 1455.253010] CPU5: Package power limit notification (total events = 488) [ 1455.253013] CPU1: Package power limit notification (total events = 489) [ 1455.263966] CPU4: Package power limit normal [ 1455.263969] CPU2: Package power limit normal [ 1455.263972] CPU0: Package power limit normal [ 1455.263975] CPU6: Package power limit normal [ 1455.263998] CPU1: Package power limit normal [ 1455.264001] CPU5: Package power limit normal [ 1455.264004] CPU7: Package power limit normal [ 1455.264007] CPU3: Package power limit normal
– aceqott
May 2 '12 at 12:39
Weird. I was hoping that there would be some trace of kernel log that said it had at least seen a device plugged in... I'm sorry I can't help you much here.
– harisibrahimkv
May 2 '12 at 12:42
What is the output of "dmesg | tail" after connecting your pen drive?
– harisibrahimkv
May 2 '12 at 12:38
What is the output of "dmesg | tail" after connecting your pen drive?
– harisibrahimkv
May 2 '12 at 12:38
[ 1455.253010] CPU5: Package power limit notification (total events = 488) [ 1455.253013] CPU1: Package power limit notification (total events = 489) [ 1455.263966] CPU4: Package power limit normal [ 1455.263969] CPU2: Package power limit normal [ 1455.263972] CPU0: Package power limit normal [ 1455.263975] CPU6: Package power limit normal [ 1455.263998] CPU1: Package power limit normal [ 1455.264001] CPU5: Package power limit normal [ 1455.264004] CPU7: Package power limit normal [ 1455.264007] CPU3: Package power limit normal
– aceqott
May 2 '12 at 12:39
[ 1455.253010] CPU5: Package power limit notification (total events = 488) [ 1455.253013] CPU1: Package power limit notification (total events = 489) [ 1455.263966] CPU4: Package power limit normal [ 1455.263969] CPU2: Package power limit normal [ 1455.263972] CPU0: Package power limit normal [ 1455.263975] CPU6: Package power limit normal [ 1455.263998] CPU1: Package power limit normal [ 1455.264001] CPU5: Package power limit normal [ 1455.264004] CPU7: Package power limit normal [ 1455.264007] CPU3: Package power limit normal
– aceqott
May 2 '12 at 12:39
Weird. I was hoping that there would be some trace of kernel log that said it had at least seen a device plugged in... I'm sorry I can't help you much here.
– harisibrahimkv
May 2 '12 at 12:42
Weird. I was hoping that there would be some trace of kernel log that said it had at least seen a device plugged in... I'm sorry I can't help you much here.
– harisibrahimkv
May 2 '12 at 12:42
add a comment |
2 Answers
2
active
oldest
votes
first format the USB in NTFS. just use fidisk-l to check wether if it is showing in the device list WITH NTFS file system. Remember the device name and mount the device using command sudo mount /dev/sda2 /mnt //assuming sda2 is NTFS formatted USB device.
edit: I recommend you to format the USB device as ntfs for it makes easy on a linux system to check the ntfs device and figure out what it is.
answered May 2 '12 at 12:44
ashutoshashutosh
1,2121115
I do not understand
– aceqott
May 2 '12 at 12:50
idea behind it is simple. I just want to check if the usb is plugged in. If it does, then mounting it may solve the problem. Other wise you can check further for answer. Whats the output ofsudo fdisk -l?
– ashutosh
May 2 '12 at 12:56
I do not recognize it:
– aceqott
May 2 '12 at 12:59
Disco /dev/sda: 500.1 GB Unidades = sectores de 1 * 512 = 512 bytes Tamaño de sector (lógico / físico): 512 bytes / 512 bytes Tamaño E/S (mínimo/óptimo): 512 bytes / 512 bytes Identificador del disco: 0x00013fd6 Dispositivo Inicio Comienzo Fin Bloques Id Sistema /dev/sda1 * 2048 97656831 48827392 83 Linux /dev/sda2 968959998 976771071 3905537 5 Extendida /dev/sda3 97656832 968957951 435650560 83 Linux /dev/sda5 968960000 976771071 3905536 82 Linux swap / Solaris
– aceqott
May 2 '12 at 12:59
have you formatted it with ntfs file system and still not getting any ntfs devices listed? I mean which file system your USB device is having?
– ashutosh
May 2 '12 at 13:00
|
show 9 more comments
Does that particular USB port work when other devices are plugged in? It is possible that that USB hub on your machine isn't working under Ubuntu. It should always recognize that there is a device being plugged in -- do dmesg |grep /dev and see what the last device comes out to be.
As a test, plug a mouse into that USB port and see if it is working as expected (watch "dmesg | tail", CTRL+C to break out)
Another possibility is that, the device requires more power than the port can provide, but whatever the case, try another USB port on your machine and see if the behavior continues.
answered May 2 '12 at 13:44
papashoupapashou
2,290198
I am Spanish and I can not understand what you say. Leave it, thank you very much for the help.
– aceqott
May 2 '12 at 14:54
Usually, I got it, thanks to a MAC. I formated in NTFS using a MAC. Thank you very much everyone for your help really. A greeting very strong, close the issue.
– aceqott
May 2 '12 at 15:24
Hi, I'm not sure I understand- are you talking about Mac OSX? You cannot format a device to NTFS format using a Mac that I was aware of.
– papashou
May 3 '12 at 1:29
Well if you have the option of NTFS what happens next with a new name: Windows NT compression or something.
– aceqott
May 5 '12 at 9:26
You can use Disk Utility to format USB flash drives.
– ThePiercingPrince
Jun 28 '13 at 1:10
add a comment |
Your Answer
StackExchange.ready(function()
var channelOptions =
tags: "".split(" "),
id: "89"
;
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function()
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled)
StackExchange.using("snippets", function()
createEditor();
);
else
createEditor();
);
function createEditor()
StackExchange.prepareEditor(
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader:
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
,
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
);
);
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f130052%2fubuntu-12-04-does-not-recognize-kingston-dt108-16gb-usb-drive%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
first format the USB in NTFS. just use fidisk-l to check wether if it is showing in the device list WITH NTFS file system. Remember the device name and mount the device using command sudo mount /dev/sda2 /mnt //assuming sda2 is NTFS formatted USB device.
edit: I recommend you to format the USB device as ntfs for it makes easy on a linux system to check the ntfs device and figure out what it is.
answered May 2 '12 at 12:44
ashutoshashutosh
1,2121115
I do not understand
– aceqott
May 2 '12 at 12:50
idea behind it is simple. I just want to check if the usb is plugged in. If it does, then mounting it may solve the problem. Other wise you can check further for answer. Whats the output ofsudo fdisk -l?
– ashutosh
May 2 '12 at 12:56
I do not recognize it:
– aceqott
May 2 '12 at 12:59
Disco /dev/sda: 500.1 GB Unidades = sectores de 1 * 512 = 512 bytes Tamaño de sector (lógico / físico): 512 bytes / 512 bytes Tamaño E/S (mínimo/óptimo): 512 bytes / 512 bytes Identificador del disco: 0x00013fd6 Dispositivo Inicio Comienzo Fin Bloques Id Sistema /dev/sda1 * 2048 97656831 48827392 83 Linux /dev/sda2 968959998 976771071 3905537 5 Extendida /dev/sda3 97656832 968957951 435650560 83 Linux /dev/sda5 968960000 976771071 3905536 82 Linux swap / Solaris
– aceqott
May 2 '12 at 12:59
have you formatted it with ntfs file system and still not getting any ntfs devices listed? I mean which file system your USB device is having?
– ashutosh
May 2 '12 at 13:00
|
show 9 more comments
first format the USB in NTFS. just use fidisk-l to check wether if it is showing in the device list WITH NTFS file system. Remember the device name and mount the device using command sudo mount /dev/sda2 /mnt //assuming sda2 is NTFS formatted USB device.
edit: I recommend you to format the USB device as ntfs for it makes easy on a linux system to check the ntfs device and figure out what it is.
answered May 2 '12 at 12:44
ashutoshashutosh
1,2121115
I do not understand
– aceqott
May 2 '12 at 12:50
idea behind it is simple. I just want to check if the usb is plugged in. If it does, then mounting it may solve the problem. Other wise you can check further for answer. Whats the output ofsudo fdisk -l?
– ashutosh
May 2 '12 at 12:56
I do not recognize it:
– aceqott
May 2 '12 at 12:59
Disco /dev/sda: 500.1 GB Unidades = sectores de 1 * 512 = 512 bytes Tamaño de sector (lógico / físico): 512 bytes / 512 bytes Tamaño E/S (mínimo/óptimo): 512 bytes / 512 bytes Identificador del disco: 0x00013fd6 Dispositivo Inicio Comienzo Fin Bloques Id Sistema /dev/sda1 * 2048 97656831 48827392 83 Linux /dev/sda2 968959998 976771071 3905537 5 Extendida /dev/sda3 97656832 968957951 435650560 83 Linux /dev/sda5 968960000 976771071 3905536 82 Linux swap / Solaris
– aceqott
May 2 '12 at 12:59
have you formatted it with ntfs file system and still not getting any ntfs devices listed? I mean which file system your USB device is having?
– ashutosh
May 2 '12 at 13:00
|
show 9 more comments
first format the USB in NTFS. just use fidisk-l to check wether if it is showing in the device list WITH NTFS file system. Remember the device name and mount the device using command sudo mount /dev/sda2 /mnt //assuming sda2 is NTFS formatted USB device.
edit: I recommend you to format the USB device as ntfs for it makes easy on a linux system to check the ntfs device and figure out what it is.
answered May 2 '12 at 12:44
ashutoshashutosh
1,2121115
first format the USB in NTFS. just use fidisk-l to check wether if it is showing in the device list WITH NTFS file system. Remember the device name and mount the device using command sudo mount /dev/sda2 /mnt //assuming sda2 is NTFS formatted USB device.
edit: I recommend you to format the USB device as ntfs for it makes easy on a linux system to check the ntfs device and figure out what it is.
answered May 2 '12 at 12:44
ashutoshashutosh
1,2121115
edited May 2 '12 at 12:57
answered May 2 '12 at 12:44
ashutoshashutosh
1,2121115
answered May 2 '12 at 12:44
ashutoshashutosh
1,2121115
answered May 2 '12 at 12:44
ashutoshashutosh
1,2121115
1,2121115
I do not understand
– aceqott
May 2 '12 at 12:50
idea behind it is simple. I just want to check if the usb is plugged in. If it does, then mounting it may solve the problem. Other wise you can check further for answer. Whats the output ofsudo fdisk -l?
– ashutosh
May 2 '12 at 12:56
I do not recognize it:
– aceqott
May 2 '12 at 12:59
Disco /dev/sda: 500.1 GB Unidades = sectores de 1 * 512 = 512 bytes Tamaño de sector (lógico / físico): 512 bytes / 512 bytes Tamaño E/S (mínimo/óptimo): 512 bytes / 512 bytes Identificador del disco: 0x00013fd6 Dispositivo Inicio Comienzo Fin Bloques Id Sistema /dev/sda1 * 2048 97656831 48827392 83 Linux /dev/sda2 968959998 976771071 3905537 5 Extendida /dev/sda3 97656832 968957951 435650560 83 Linux /dev/sda5 968960000 976771071 3905536 82 Linux swap / Solaris
– aceqott
May 2 '12 at 12:59
have you formatted it with ntfs file system and still not getting any ntfs devices listed? I mean which file system your USB device is having?
– ashutosh
May 2 '12 at 13:00
|
show 9 more comments
I do not understand
– aceqott
May 2 '12 at 12:50
idea behind it is simple. I just want to check if the usb is plugged in. If it does, then mounting it may solve the problem. Other wise you can check further for answer. Whats the output ofsudo fdisk -l?
– ashutosh
May 2 '12 at 12:56
I do not recognize it:
– aceqott
May 2 '12 at 12:59
Disco /dev/sda: 500.1 GB Unidades = sectores de 1 * 512 = 512 bytes Tamaño de sector (lógico / físico): 512 bytes / 512 bytes Tamaño E/S (mínimo/óptimo): 512 bytes / 512 bytes Identificador del disco: 0x00013fd6 Dispositivo Inicio Comienzo Fin Bloques Id Sistema /dev/sda1 * 2048 97656831 48827392 83 Linux /dev/sda2 968959998 976771071 3905537 5 Extendida /dev/sda3 97656832 968957951 435650560 83 Linux /dev/sda5 968960000 976771071 3905536 82 Linux swap / Solaris
– aceqott
May 2 '12 at 12:59
have you formatted it with ntfs file system and still not getting any ntfs devices listed? I mean which file system your USB device is having?
– ashutosh
May 2 '12 at 13:00
I do not understand
– aceqott
May 2 '12 at 12:50
I do not understand
– aceqott
May 2 '12 at 12:50
idea behind it is simple. I just want to check if the usb is plugged in. If it does, then mounting it may solve the problem. Other wise you can check further for answer. Whats the output of
sudo fdisk -l ?– ashutosh
May 2 '12 at 12:56
idea behind it is simple. I just want to check if the usb is plugged in. If it does, then mounting it may solve the problem. Other wise you can check further for answer. Whats the output of
sudo fdisk -l ?– ashutosh
May 2 '12 at 12:56
I do not recognize it:
– aceqott
May 2 '12 at 12:59
I do not recognize it:
– aceqott
May 2 '12 at 12:59
Disco /dev/sda: 500.1 GB Unidades = sectores de 1 * 512 = 512 bytes Tamaño de sector (lógico / físico): 512 bytes / 512 bytes Tamaño E/S (mínimo/óptimo): 512 bytes / 512 bytes Identificador del disco: 0x00013fd6 Dispositivo Inicio Comienzo Fin Bloques Id Sistema /dev/sda1 * 2048 97656831 48827392 83 Linux /dev/sda2 968959998 976771071 3905537 5 Extendida /dev/sda3 97656832 968957951 435650560 83 Linux /dev/sda5 968960000 976771071 3905536 82 Linux swap / Solaris
– aceqott
May 2 '12 at 12:59
Disco /dev/sda: 500.1 GB Unidades = sectores de 1 * 512 = 512 bytes Tamaño de sector (lógico / físico): 512 bytes / 512 bytes Tamaño E/S (mínimo/óptimo): 512 bytes / 512 bytes Identificador del disco: 0x00013fd6 Dispositivo Inicio Comienzo Fin Bloques Id Sistema /dev/sda1 * 2048 97656831 48827392 83 Linux /dev/sda2 968959998 976771071 3905537 5 Extendida /dev/sda3 97656832 968957951 435650560 83 Linux /dev/sda5 968960000 976771071 3905536 82 Linux swap / Solaris
– aceqott
May 2 '12 at 12:59
have you formatted it with ntfs file system and still not getting any ntfs devices listed? I mean which file system your USB device is having?
– ashutosh
May 2 '12 at 13:00
have you formatted it with ntfs file system and still not getting any ntfs devices listed? I mean which file system your USB device is having?
– ashutosh
May 2 '12 at 13:00
|
show 9 more comments
Does that particular USB port work when other devices are plugged in? It is possible that that USB hub on your machine isn't working under Ubuntu. It should always recognize that there is a device being plugged in -- do dmesg |grep /dev and see what the last device comes out to be.
As a test, plug a mouse into that USB port and see if it is working as expected (watch "dmesg | tail", CTRL+C to break out)
Another possibility is that, the device requires more power than the port can provide, but whatever the case, try another USB port on your machine and see if the behavior continues.
answered May 2 '12 at 13:44
papashoupapashou
2,290198
I am Spanish and I can not understand what you say. Leave it, thank you very much for the help.
– aceqott
May 2 '12 at 14:54
Usually, I got it, thanks to a MAC. I formated in NTFS using a MAC. Thank you very much everyone for your help really. A greeting very strong, close the issue.
– aceqott
May 2 '12 at 15:24
Hi, I'm not sure I understand- are you talking about Mac OSX? You cannot format a device to NTFS format using a Mac that I was aware of.
– papashou
May 3 '12 at 1:29
Well if you have the option of NTFS what happens next with a new name: Windows NT compression or something.
– aceqott
May 5 '12 at 9:26
You can use Disk Utility to format USB flash drives.
– ThePiercingPrince
Jun 28 '13 at 1:10
add a comment |
Does that particular USB port work when other devices are plugged in? It is possible that that USB hub on your machine isn't working under Ubuntu. It should always recognize that there is a device being plugged in -- do dmesg |grep /dev and see what the last device comes out to be.
As a test, plug a mouse into that USB port and see if it is working as expected (watch "dmesg | tail", CTRL+C to break out)
Another possibility is that, the device requires more power than the port can provide, but whatever the case, try another USB port on your machine and see if the behavior continues.
answered May 2 '12 at 13:44
papashoupapashou
2,290198
I am Spanish and I can not understand what you say. Leave it, thank you very much for the help.
– aceqott
May 2 '12 at 14:54
Usually, I got it, thanks to a MAC. I formated in NTFS using a MAC. Thank you very much everyone for your help really. A greeting very strong, close the issue.
– aceqott
May 2 '12 at 15:24
Hi, I'm not sure I understand- are you talking about Mac OSX? You cannot format a device to NTFS format using a Mac that I was aware of.
– papashou
May 3 '12 at 1:29
Well if you have the option of NTFS what happens next with a new name: Windows NT compression or something.
– aceqott
May 5 '12 at 9:26
You can use Disk Utility to format USB flash drives.
– ThePiercingPrince
Jun 28 '13 at 1:10
add a comment |
Does that particular USB port work when other devices are plugged in? It is possible that that USB hub on your machine isn't working under Ubuntu. It should always recognize that there is a device being plugged in -- do dmesg |grep /dev and see what the last device comes out to be.
As a test, plug a mouse into that USB port and see if it is working as expected (watch "dmesg | tail", CTRL+C to break out)
Another possibility is that, the device requires more power than the port can provide, but whatever the case, try another USB port on your machine and see if the behavior continues.
answered May 2 '12 at 13:44
papashoupapashou
2,290198
Does that particular USB port work when other devices are plugged in? It is possible that that USB hub on your machine isn't working under Ubuntu. It should always recognize that there is a device being plugged in -- do dmesg |grep /dev and see what the last device comes out to be.
As a test, plug a mouse into that USB port and see if it is working as expected (watch "dmesg | tail", CTRL+C to break out)
Another possibility is that, the device requires more power than the port can provide, but whatever the case, try another USB port on your machine and see if the behavior continues.
answered May 2 '12 at 13:44
papashoupapashou
2,290198
answered May 2 '12 at 13:44
papashoupapashou
2,290198
answered May 2 '12 at 13:44
papashoupapashou
2,290198
answered May 2 '12 at 13:44
papashoupapashou
2,290198
2,290198
I am Spanish and I can not understand what you say. Leave it, thank you very much for the help.
– aceqott
May 2 '12 at 14:54
Usually, I got it, thanks to a MAC. I formated in NTFS using a MAC. Thank you very much everyone for your help really. A greeting very strong, close the issue.
– aceqott
May 2 '12 at 15:24
Hi, I'm not sure I understand- are you talking about Mac OSX? You cannot format a device to NTFS format using a Mac that I was aware of.
– papashou
May 3 '12 at 1:29
Well if you have the option of NTFS what happens next with a new name: Windows NT compression or something.
– aceqott
May 5 '12 at 9:26
You can use Disk Utility to format USB flash drives.
– ThePiercingPrince
Jun 28 '13 at 1:10
add a comment |
I am Spanish and I can not understand what you say. Leave it, thank you very much for the help.
– aceqott
May 2 '12 at 14:54
Usually, I got it, thanks to a MAC. I formated in NTFS using a MAC. Thank you very much everyone for your help really. A greeting very strong, close the issue.
– aceqott
May 2 '12 at 15:24
Hi, I'm not sure I understand- are you talking about Mac OSX? You cannot format a device to NTFS format using a Mac that I was aware of.
– papashou
May 3 '12 at 1:29
Well if you have the option of NTFS what happens next with a new name: Windows NT compression or something.
– aceqott
May 5 '12 at 9:26
You can use Disk Utility to format USB flash drives.
– ThePiercingPrince
Jun 28 '13 at 1:10
I am Spanish and I can not understand what you say. Leave it, thank you very much for the help.
– aceqott
May 2 '12 at 14:54
I am Spanish and I can not understand what you say. Leave it, thank you very much for the help.
– aceqott
May 2 '12 at 14:54
Usually, I got it, thanks to a MAC. I formated in NTFS using a MAC. Thank you very much everyone for your help really. A greeting very strong, close the issue.
– aceqott
May 2 '12 at 15:24
Usually, I got it, thanks to a MAC. I formated in NTFS using a MAC. Thank you very much everyone for your help really. A greeting very strong, close the issue.
– aceqott
May 2 '12 at 15:24
Hi, I'm not sure I understand- are you talking about Mac OSX? You cannot format a device to NTFS format using a Mac that I was aware of.
– papashou
May 3 '12 at 1:29
Hi, I'm not sure I understand- are you talking about Mac OSX? You cannot format a device to NTFS format using a Mac that I was aware of.
– papashou
May 3 '12 at 1:29
Well if you have the option of NTFS what happens next with a new name: Windows NT compression or something.
– aceqott
May 5 '12 at 9:26
Well if you have the option of NTFS what happens next with a new name: Windows NT compression or something.
– aceqott
May 5 '12 at 9:26
You can use Disk Utility to format USB flash drives.
– ThePiercingPrince
Jun 28 '13 at 1:10
You can use Disk Utility to format USB flash drives.
– ThePiercingPrince
Jun 28 '13 at 1:10
add a comment |
Thanks for contributing an answer to Ask Ubuntu!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f130052%2fubuntu-12-04-does-not-recognize-kingston-dt108-16gb-usb-drive%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
What is the output of "dmesg | tail" after connecting your pen drive?
– harisibrahimkv
May 2 '12 at 12:38
[ 1455.253010] CPU5: Package power limit notification (total events = 488) [ 1455.253013] CPU1: Package power limit notification (total events = 489) [ 1455.263966] CPU4: Package power limit normal [ 1455.263969] CPU2: Package power limit normal [ 1455.263972] CPU0: Package power limit normal [ 1455.263975] CPU6: Package power limit normal [ 1455.263998] CPU1: Package power limit normal [ 1455.264001] CPU5: Package power limit normal [ 1455.264004] CPU7: Package power limit normal [ 1455.264007] CPU3: Package power limit normal
– aceqott
May 2 '12 at 12:39
Weird. I was hoping that there would be some trace of kernel log that said it had at least seen a device plugged in... I'm sorry I can't help you much here.
– harisibrahimkv
May 2 '12 at 12:42